NETIO 4x firmware

Subscribe to be informed about new releases of new NETIO firmware

Firmware NETIO PowerPDU 4C: 3.4.4 (21 MB)

2023/10/23

!!!WARNING!!! PowerPDU 4C Only

= NETIO PowerPDU 4C Firmware Release Notes=
- version 3.4.4  
 
== What's new in NETIO PowerPDU firmware since version 3.4.3 ==
 
* Fixed Cnsumption counter overflow at 1.2MWh
 
== Known Issues ==
* Restart of the device takes a bit more time when HTTPS enabled.
* Missing language translations of new features
* TCP serial port  bridge in NETIO 4C can lost few bytes in stream under heavy input load. (e.g. file transfers) We recomend to use it only for commands at lower baud rates.
* Problem with configuration export when national specific characters are used in device setup
 
== Notes ==
* Starting from fw version 2.3.5, the firmware is only compatible with products manufactured after 2016/11/20 by NETIO products company.
* Upgrade from fw version 2.3.5 will cause reset of the power consumption counters.
 
 
In case of any problems or questions please visit www.netio-products.com or contact the support at support@netio.eu.

 

 



 



 

 

Firmware NETIO 4x: 3.4.3 (91,8 MB)

2022/12/14

 

= NETIO 4x (NETIO 4/4All/4C, PowerPDU 4C) Firmware Release Notes=
- version 3.4.3  
 
== What's new in NETIO 4x firmware since version 3.4.0 ==
 
* Added support for NETIO Mobile 2 control over cloud
* Added support for Custom Certificate-Key pair for HTTPs
* Removed online auto update (not supported anymore)
* Root CA certificates updated
 
== Known Issues ==
* Restart of the device takes a bit more time when HTTPS enabled.
* Missing language translations of new features
* TCP serial port  bridge in NETIO 4C can lost few bytes in stream under heavy input load. (e.g. file transfers) We recomend to use it only for commands at lower baud rates.
* Problem with configuration export when national specific characters are used in device setup
 
== Notes ==
* Starting from fw version 2.3.5, the firmware is only compatible with products manufactured after 2016/11/20 by NETIO products company.
* Upgrade from fw version 2.3.5 will cause reset of the power consumption counters.
 
 
In case of any problems or questions please visit www.netio-products.com or contact the support at support@netio.eu.

 

 



 

 

Firmware NETIO 4x: 3.4.0 (91,8 MB)

2020/04/24

 

What's new in NETIO 4x firmware since version 3.3.1
 
* Added support for NETIO Cloud
* Talkative MQTT fixed
* Added support for MQTT update publish based on Current (A) and TPF delta
* MQTT reconnecion system fixed
* System/network settings import bugs fixed
* Root CA certificates updated
 
== Known Issues ==
* Restart of the device takes a bit more time when HTTPS enabled. Will be fixed in the future.
* Missing language translations of new features
* TCP serial port  bridge in NETIO 4C can lost few bytes in stream under heavy input load. (e.g. file transfers) We recomend to use it only for commands at lower baud rates.
* Problem with configuration export when national specific characters are used in device setup
 
== Notes ==
* Starting from fw version 2.3.5, the firmware is only compatible with products manufactured after 2016/11/20 by NETIO products company.
* Upgrade from fw version 2.3.5 will cause reset of the power consumption counters.
 
 
In case of any problems or questions please visit www.netio-products.com or contact the support at support@netio.eu.

 

 

Firmware NETIO 4x: 3.3.1 (91,7MB)

2019/06/25

 

What's new in NETIO 4x firmware since version 3.1.0
  • Added support for LUA SNMP active client
  • Added support for LUA Modbus active client
  • Added support for LUA MQTT Active client
  • Added support for using device serial number in LUA script
  • Added support for LUA JSON encoder/decoder
  • Added support for configuration import/export
  • Character ":" can be used in MQTT setup. IBM Bluemix required.
  • Default power up state ON/OFF/LAST
  • Wifi scanning problem when hidden network is in reach is fixed.
  • Persistent log was turned off. Log will not be remembered during power off cycle.
  • Log output state checkbox moved to Sesttings/System
Known Issues
  • Restart of the device takes a bit more time when HTTPS enabled. Will be fixed in the future.
  • Missing language translations of new features
  • TCP serial port  bridge in NETIO 4C can lost few bytes in stream under heavy input load. (e.g. file transfers) We recomend to use it only for commands at lower baud rates.
Notes
  • Starting from fw version 2.3.5, the firmware is only compatible with products manufactured after 2016/11/20 by NETIO products company.
  • Upgrade from fw version 2.3.5 will cause reset of the power consumption counters.
 
 
In case of any problems or questions please visit www.netio-products.com or contact the support at support@netio.eu.

 

Firmware NETIO 4x: 3.1.0 (72,1MB)

2018/7/24

Starting from fw version 2.3.5, the firmware is only compatible with products manufactured after 2016/11/20 by NETIO products company.
 
Upgrade from fw version 2.3.5 will cause reset of the power consumption counters.
 
In case of any problems or questions please visit www.netio-products.com or contact the support at support@netio.eu.

What's new in NETIO 4x firmware since version 3.0.6

  • Support of MODBUS/TCP with IP filter for this one M2M protocol
  • New M2M XML/JSON testing interface
  • M2M SNMP energy measurements – values added to the MIB
  • M2M SNMP MIB change ("Outlet" to "Output", OID without change)
  • LUA Action - added new default script
  • LUA Action - added new commands for measurement reading
  • WEB GUI redirections improved
  • WEB GUI labels changes + title page contains revisions
  • Enabled M2M protocol is highlighted with green button
  • Serial port bugfixes (only NETIO 4C)
  • DHCP client waits 120 seconds for address from server during system startup
  • New DHCP request just after cable is plugged in 
  • Restart is faster after M2M API setup change
  • CGI M2M API was renamed to "URL API"

Known Issues

  • Restart of the device takes a bit more time when HTTPS enabled. Will be fixed in the future.
  • Missing language translations of new features
  • Manual change of an output while scheduler is active will cause pop-up with info that Scheduler will be turned off. The real behavior is that a scheduler stays turned on and the output state will change(according to manual switch) until the next planned event in a scheduled.
  • TCP serial port  bridge in NETIO 4C can lost few bytes in stream under heavy input load. (e.g. file transfers) We recomend to use it only for commands at lower baud rates.

 

 

Firmware NETIO 4x: 3.0.3 (72,0 MB)

2018/01/11

BUGFIX: fix admin password change issues

Starting from fw version 2.3.5, the firmware is only compatible with products manufactured after 2016/11/20 by NETIO products company.

Upgrade from fw version 2.3.5 will cause reset of the power consumption counters.

In case of any problems or questions please visit www.netio-products.com or contact the support at support@netio.eu.
 
Changes from version 3.0.2
  • N4All HOTFIX - has no effect on older devices - updated measurement feature during production process with quality check

What's new in NETIO 4x firmware since version 2.3.6

  • New M2M API protocol – XML / HTTP(s)
  • New M2M API protocol – JSON / HTTP(s)
  • New M2M API protocol – CGI (URL address - HTTP post) – no Lua script required any more

 

  • TCP connection port can be modified per M2M API protocol. HTTP(s) based communication share 2 ports only.
  • New measurement values (V,A,Wh,W,PF,Hz) - only devices NETIO 4All manufactured after June 2017
  • New values available in SNMP - measurement, uptime
  • MQTT message format changed – check M2M API documentation
 
  • Time delay gap between power outputs (when switching ON several outputs in one time) was removed. Time gap between outputs is 200 ms in default now. It’s applied only when device power-up and recover previous output states.
  • SSL certificates verification against certified authority
  • Custom network ports
 
  • Time delays setup is now possible in milliseconds, boundaries change
  • Switching all outputs ON at once is now possible from M2M API protocols
  • New control commands from M2M APIs – toggle output, short on (switch ON to defined time)
  • Device name separated from network hostname
  • Scheduler event controlled behavior (enables manual control during active calendar)

Known Issues

  • Restart of the device takes a bit more time when HTTPS enabled. Will be fixed in the future.
  • Missing language translations of new features
  • Manual change of an output while scheduler is active will cause pop-up with info that Scheduler will be turned off. The real behavior is that a scheduler stays turned on and the output state will change(according to manual switch) until the next planned event in a scheduled.

 

Firmware NETIO 4x: 3.0.1 (72,0 MB)

2017/11/21

Starting from fw version 2.3.5, the firmware is only compatible with products manufactured after 2016/11/20 by NETIO products company.
 
Upgrade from fw version 2.3.5 will cause reset of the power consumption counters.
 
In case of any problems or questions please visit www.netio-products.com or contact the support at support@netio.eu.

What's new in NETIO 4x firmware since version 2.3.6

  • New M2M API protocol – XML / HTTP(s)
  • New M2M API protocol – JSON / HTTP(s)
  • New M2M API protocol – CGI (URL address - HTTP post) – no Lua script required any more
 
  • TCP connection port can be modified per M2M API protocol. HTTP(s) based communication share 2 ports only.
  • New measurement values (V,A,Wh,W,PF,Hz) - only devices NETIO 4All manufactured after June 2017
  • New values available in SNMP - measurement, uptime
  • MQTT message format changed – check M2M API documentation
 
  • Time delay gap between power outputs (when switching ON several outputs in one time) was removed. Time gap between outputs is 200 ms in default now. It’s applied only when device power-up and recover previous output states.
  • SSL certificates verification against certified authority
  • Custom network ports
 
  • Time delays setup is now possible in milliseconds, boundaries change
  • Switching all outputs ON at once is now possible from M2M API protocols
  • New control commands from M2M APIs – toggle output, short on (switch ON to defined time)
  • Device name separated from network hostname
  • Scheduler event controlled behavior (enables manual control during active calendar)

Known Issues

  • Restart of the device takes a bit more time when HTTPS enabled. Will be fixed in the future.
  • Missing language translations of new features
  • Manual change of an output while scheduler is active will cause pop-up with info that Scheduler will be turned off. The real behavior is that a scheduler stays turned on and the output state will change(according to manual switch) until the next planned event in a scheduled.

 

 

Firmware NETIO 4x: 2.3.6 (59,2 MB)

2017/04/10

Starting from version 2.3.5, the firmware is only compatible with products manufactured after 2016/11/20 by NETIO products company. Upgrades from firmware version 2.3.5 will reset the power consumption counters.

In case of any problems or questions please contact the support at support@netio.eu.

What's New Since 2.3.5

  • XML parser is accessible from LUA scripts.
  • Telnet/KSHELL is switched off by default.
  • Minor fixes in user interface.
  • Support of MQTT protocol - MS Azure and Generic mode.
  • Discover protocol changes.
  • General Reset of power consumption counters.
  • New version of SNMP MIB - changed units of power measurement + bug fixes.

Known Issues

  • Restart of the device takes a bit more time when HTTPS is enabled. Please be patient.
 

Firmware NETIO 4x: 2.3.5 (59,6 MB)

2017/04/07

Firmware 2.3.5 is the initial release for new generation of NETIO4 smart socket from NETIO products Inc. New firmware generation continues on previous firmware versions from Koukaam Inc. and includes all bug fixes and new features from Netio 4 product line. Due to changes in the firmware the new firmware 2.3.5 is compatible only with products manufactured after 2016/11/20 !
 
In case of any problems or questions please contact the support at support@netio.eu.

Features overtaken from previous devices

  • Four remotely controlled power outlets
  • Watchdog for automatic status monitoring of connected devices with reboot option
  • User defined schedules for timing of outlet power switching
  • User accounts with configurable permissions
  • E-mail notifications about outlet switching, watchdog and timer actions
  • Integration by Telnet and CGI commands
  • NETIO can be controlled by Telnet or CGI and can control other devices by CGI.
  • NETIO4 supports a vasic set of KSHELL commands. You can find the list of supported commands in the user manual.
  • Lua scripting language for system integration and customization
  • Advanced integration by XML API
  • Secure access using HTTPS connection
  • Support of SMTP, NTP, UPnP a DHCP, SNMPv3 protocols

What's New Since 2.3.4

  • Faster device startup
  • Support of bitwise operations LUA
  • cgiGet() function in LUA - Possibility of sending HTTP request from LUA a recevie the response directly to LUA

Only on NETIO4 All

  • Power consumption measurement on every outlet
  • Bluetooth function was limited only to customer firmwares

Known Issues

  • Restart of the device takes a few more minutes when HTTPS is enabled. Please be patient.

Languages

NETIO4 is available in the following languages: Czech, English, German, Italian, Spanish

System Requirements

Operating System

  • Microsoft Windows 2003, 2008, XP, Vista, 7, 8 and 10 (both 32-bit and 64-bit)
  • Mac OS X 10.7, 10.8 and 10.9
  • Linux 2.6 or newer

Web Browser

  • Firefox 24 ESR, 26 or newer
  • Chrome 32 or newer
  • Internet Explorer 10 and 11
  • Safari 6.1 or newer (Mac OS only)
  • (JavaScript and cookies need to be enabled)

 

 

Ask for a price or technical parameters

For device testing use name/password demo/demo